How to Vacuum Swimming Pools Manually In 3 Steps

  • by
How to Vacuum Swimming Pools Manually

Doing regular maintenance of swimming pools is an obligatory job for every homeowner because it can keep the pool clean from organic and inorganic contaminants that might bother your swimming experience. Cleaning the wall and floor of swimming pools is the basic maintenance work that you can do by yourself. Yes, you don’t have to hire a professional just to clean your swimming pool. You’re here on the right page if you’re looking for simple steps to clean your pool with your own hands.

(You may also like this: Above Ground Swimming Pool: 20+ Inspiring Design Ideas on a Budget)

How to Vacuum Swimming Pools Manually

First of all, you have to prepare some tools to proceed with this process. Those tools are:

  • Pool vacuum head
  • Vacuum head
  • Vacuum plate
  • Telescoping pole

Once you collect the tools, let’s get started!

PREPARE THE TOOLS

How to Vacuum Swimming Pools Manually 1

aquatechpoolsystems.com

Before vacuuming, you have to purge the air from the system because the air pockets that stuck in the hose can slower the vacuum since it reduces the suction.

  • Immerse the vacuum head into the pool until it reaches the floor.
  • Push the other end of the vacuum hose.
  • When you notice some air bubbles popped up from the vac head, wait until the bubbles are completely gone.

(You may also like this: Swimming Pool Landscaping Ideas: 20+ Beautiful Inspirations to Copy)

START VACUUMING

How to Vacuum Swimming Pools Manually 2

poolcleanerlab.com

You have to connect the hose to the circulation pump to start the vacuuming process by following these steps:

  • Put the vac plate into the skimmer and leave the basket in place.
  • Remove the skimmer cover and attach the hose directly to the vac plate.
  • If the skimmer comes with elbow fitting, you can use it to secure the hose.

Please remember that vacuuming a swimming pool needs a lot of patience, especially if you have a big-sized one. You have to make sure that everything vacuumed and out from your pool.

(You may also like this: Rectangular Swimming Pool Ideas: 20+ Simple Designs for Minimalist Home)

CLEAN THE WALL AND FLOOR

Once the whole swimming pool empty, it’s time to clean the surface with a brush so all the dirt swept away. Some steps that you can do are:

  • Scrubbing the wall and floor from any dirt, mold, mildew, or algae that might cause irritation to the skin and make the water dirty.
  • Ensure that you use a product that is skin and eco-friendly so it’s less harmless for your family members.
  • Once the scrubbing process is done and you’re ready to re-fill the water, you have to make sure the chemistry level of the water by using alkalinity test strips so the water won’t be too acidic nor ‘basic’.

Scrubbing the wall and floor of the swimming pool can be done once every two weeks or more if you use it often for various occasions. Therefore, you don’t have to worry about the water quality before using the pool.

(You may also like this: Simple Swimming Pool Ideas: 24+ Inspiring Designs for Minimalist Backyard)

So, those are 3 simple steps that you can do to clean your swimming pool manually by yourself. Of course, if you think that the scale of the swimming pool and the problem is too difficult to handle, you might want to contact the nearest dealer or pool cleaning service to help you.

Leave a Reply

Your email address will not be published. Required fields are marked *